Concrete, brick or stone facades | Insertion system mounting socket

Clear added value for your facade

  • Vertical photovoltaic system on the facade – separated from the building and well back-ventilated
  • Mounting exclusively on solid building walls (brick, concrete or stone) without external thermal insulation
  • Few individual components, entirely pre-assembled
  • Use of our proven insertion rail

Your benefits

Creates modern, visually attractive facades

Flexible system size: From a single module to the entire facade surface

A construction with excellent rear ventilation which hangs in front of the building but does not touch it

For solid exterior walls


Components

Roof assembly Module assembly Profile rails

Components

Click on the + Icons to see components of this mounting system.


Module recommendation facade systems

Manufacturer: Aleo Solar, Bauer Solar (AbZ/DIBt), Canadian Solar, EXE Solar, Meyer Burger, SoliTek (AbZ/DIBt), SoLuxTec, Solyco, SunPower Maxeon​, SOLARWATT


The values for wind and snow loads (Pa) can be found in the module manufacturer's installation instructions. The load values must be checked individually for each module type. The modules are attached to the short side of the frame using four module clamps. This is a point mounting without continuous substructure rails.

Note: In Germany, modules used in overhead and façade installations require a general building authority approval (AbZ/DIBt).

a = 56 mm​
b = 30 - 50 mm​
(Frame height)

 


Our facade references


More information about the facade system

With the novotegra facade mounting system, you use the exterior wall of a building to generate electricity: The photovoltaic installation is hung vertically in front of the facade – but it does not touch the building and is well-ventilated from behind. Our facade mounting system is installed on a solid exterior wall out of, for example, brick, stone or concrete – and exclusively on cold facades, meaning on walls without external insulation. Regardless of whether the exterior wall is on an industrial building or a single-family home: with our photovoltaic mounting system, we create modern, highly-aesthetic facades which give buildings visual added value. All visible mounting system components are available in Aluminium blank or black anodised and can be combined with blue or black modules.

The modules are placed in the rail with their entire frame length and held in place gently, firmly and securely. The insertion rails make module mounting quick and easy, even when installed vertically. The small handful of individual components and preassembled parts make assembly even easier. With the novotegra facade mounting system, you can mount all framed modules in portrait as well as landscape. Furthermore you can complete your facade system on all sides with a perforated sheet cladding that prevents birds and small animals from accessing the installation but still ensures excellent rear ventilation.


We support you with your project

System planning with Solar-Planit

Planning for different roofs, roof coverings and roof constructions

Initial mounting support

Focus on your project - our experts support you on site

novotegra Training Center

Improve your mounting skills with our training videos.

How can we support you?

Our mounting system experts look forward to your request! We support you in all topics relating to novotegra!

Get in touch
Contact
Buy now