PV substructure

No matter if pitched roof with tiles, corrugated eternit/sandwisch, trapezoidal metal, seamed metal or any other roof covering: the mounting systems from novotegra offer an easy-to-install, safe and reliable PV substructure for practically any roof.

Of course, this also applies to our flat roof solutions, which enable a PV substructure optimally adapted to the respective flat roof for flat roofs with gravel, bitumen/foil as well as for green roofs. In addition, mounting systems for the PV substructure on façades as well as our in-roof system are also available to you.

Quality and reliability

At novotegra you get all the components you need for mounting a photovoltaic system. And you can rely on the high quality and reliability of the mounting systems for PV substructures that we have developed: In addition to certifications from TÜV and DEKRA as well as building approvals, novotegra mounting systems have received the CE mark as well as ETN and MSC certifications for the French and British markets.

And because we are convinced of the reliability and high quality of our products, we offer you a 12-year guarantee on the mounting system.

The perfect solution for every roof

Depending on the roof, at novotegra you and your customers have the choice between different mounting systems that are optimally matched to the respective requirements of the roof. This includes, for example, the adjustable roof hooks developed by us, as well as the C-, C/N- and N-rails available in different profile heights, the optimal mounting material, tools, mounting aids and the matching accessories.

Of course, this applies not only to pitched roofs but also to flat roofs. Our east-west systems, for example, are convincing not only because they are quick and easy to install and offer a high degree of stability and safety, but also because they are easy to ballast. Advantages that the wind tunnel-tested south system for flat roofs is in no way inferior to. And the green roof system also offers sufficient distance to the roof surface for plant growth or, for example, slipping snow.

PV and roof in one

If your customers are interested in an in-roof solution: Our in-roof mounting system is suitable for any roof and is simple and - also compared to other in-roof systems on the market - very quick to set up. The photovoltaic modules are mounted directly on the roof battens without roof hooks and rails. This literally replaces a regular roof covering.

Our in-roof system meets the same waterproofing requirements as roof tiles - as confirmed by analogous tests conducted by the Sursee Test and Research Institute. Easy-to-process blind modules and visually matching, high-quality roof windows complete the in-roof system.

 

In-roof system

Facade system

With our facade system, the photovoltaic system is hung vertically - separated from the building and well ventilated - on the PV substructure in front of the facade. The mounting system is attached to the substructure using dowels and stainless steel screws approved by the building authorities. As with all other mounting systems, the modules for the solar system can also be mounted on the facade in either portrait or landscape format.

The facade system can only be mounted on solid external building walls made of brick, stone or concrete, for example, without external thermal insulation.

 

Facade system

Mounting system overview

For simple and quick planning of the optimal PV substructure and the complete photovoltaic system, we recommend using our free, web-based planning tool Solar-Planit. This allows you to quickly and precisely plan the desired photovoltaic system for all roof types, roof coverings and roof constructions: from data collection and the selection of the most suitable mounting system to the material requirements - to the appropriate accessories and the determination of the yield as well as the economic efficiency of the planned photovoltaic system.

If required, you as a commercial customer can also make use of our initial installation service. In this case, a novotegra expert will be at your side for a whole day during the installation of the PV substructure as well as the further work steps for the installation of the solar system while carrying out your order on site at the construction site with advice and assistance.

If you have any questions or require further information on novotegra photovoltaic mounting systems and the perfect PV substructure, our experts will be happy to help you at any time. We look forward to meeting you.

Clamping system top-fix

Powerful, stable and flexible

Insertion system side-fix

Powerful, stable and attractive!

Clamping system landscape

Quick assembly

Insertion system trapezoidal bracket sheet

Convincing quality

Clamping system

Secure, stable and durable

Clamping system

Quick mounting from above

Insertion system

Easy, stable and flexible

Insertion system

Perfect aesthetic and high eciency

East-west system II (single-layer)

Secure, stable and quick to install

South system II (single-layer)

Minimal ballasting

In-roof systems

All functions integrated in the frame

Facade systems

Creates modern, visually attractive facades

How can we support you?

Our mounting system experts look forward to your request! We support you in all topics relating to novotegra.

Get in touch

Subscribe to newsletter

Stay up to date: News, events, seminars and more about our mounting system.

Please add an email address.